Rack

Proscend G.Shdsl.bis TDM total solution includes the rack with the line cards in the central side and network terminal units (NTUs) at customer premises. The rack solution is a cost-effective central unit for carriers to provide their customers with symmetric high-speed digital subscriber line (Shdsl.bis) services via consumer premise equipments (CPEs) with options of G.703 interface, multi-protocol serial DCE port or Ethernet port. Supported by ProEMS, a smart, comprehensive Element Management System that offers efficient control and management of Proscend's G.shdsl.bis TDM Rack system. This powerful EMS supports features of system management, network configuration, performance monitoring, fault detection & recovery and security control. It raises productivity, improves accuracy, simplifies training and reduces costs for network operation centers.

Proscend 3000 Series TDM Rack solution has powerful automatic configuration capability that makes installation and service provisioning simple and painless. Furthermore it provides flexible manually setting of the maximum NTU speed at different levels for different customer-tailored service offerings.

Proscend 5099B Series 2-Wire/4-Wire Shdsl.bis NTU offers a variety of choices for data interfaces to meet different connection needs. The standalone G.shdsl.bis modems feature E1/T1, V.35/X.21 and Ethernet interfaces, allowing connection to different DTE types. When equipped with multiple interfaces, the standalone 5099B Series NTU combines user traffic over the SHDSL link. Available DTE combinations include E1+Serial, T1+ Serial, E1+Ethernet, T1+Ethernet, Serial+Ethernet, E1+Serial+Ethernet and T1+Serial+Ethernet. Proscend 5099B Series can be configured and managed via EOC, or menu-driven VT100 compatible Asynchronous Terminal Interface, either locally or remotely.

Product Brochure

Features

  • Central solution in standard 19 inch rack.
  • Meets ITU-T G.992.1(2004) and ETSI Standards
  • Compliance with ITU-G.703, G.704, G.706, G.732 and G.823.
  • Up to 5.696Mbps symmetric service bit rate for one pair and 11.392 Mbps symmetric service bit rate for two pairs.
  • High density and compact, 4U high, Up to 15 line cards and 1 SNMP card can be installed.
  • Support E1 and fractional E1 capable on E1 Interface.
  • Command Line Interface for easy of use via Telnet on craft console of Ethernet port on SNMP Management Module.
  • Easy upgrade by TFTP download software via SNMP Management Module.
  • Hot swapping of cards and redundant power supplies (optional).
  • All line card interface connectors on the rear panel side of rack.
  • Dual power source AC or DC in one power module.
  • Auto-Balance for Dual Power Module of Rack

Rack Specifications

WAN Interface
  • Compliance: ITU-T G.991.2
  • Line code: Shdsl.bis:TCPAM-16/32, ANSI (Annex A/F) and ETSI (Annex B/G) 
  • Line data rate: Selectable,
    SHDSL.bis: 64kbps to 5.696Mbps (N x 64K, N=1 ~ 89) for 2-wire loop
                       128kbps to 11.392Mbps (N x 64K, N=2 ~ 178) for 4-wire loop 
  • Wetting current: 4mA-20mA
  • Interface connector: 4-pin wire-rapping connector
Data Interface

E1 Interface Line Card, 3000B/3001B

  • Line code: HDB3/AMI
  • Interface connector: BNC, RJ45
  • Data rate: 64kbps to 2048kbps (N x 64K, N=1 ~ 32)
  • Operation mode: full or fractional
  • Framing: PCM30/30C/31/31C and Unframed
  • Compliance: ITU-T G.703, G.704, G.706, G.821, G.823, G.826, CTR12
  • Transmit level
    • Pulse amplitude: Nominal 2.37V+10% for 75 ohm
                               Nominal 3.00V+10% for 120 ohm
    • Zero amplitude: +0.1V
  • Transmit frequency tracking
    • Internal timing:+/- 30ppm
    • Loopback timing:+/- 50ppm
    • External timing:+/- 100ppm
  • Jitter performance: ITU-T G.823
  • LEDs Indicator: PWR, Shdsl, LOS, LOF, AIS, TEST, Error, ALARM, and FAR

Serial Interface Line Card, 3010B/3011B

  • User selectable Mode as: V.35, RS-449, RS-530, X.21
  • Data Rate: 64kbps to 5.696Mbps (N x 64K, N=1 ~ 89) for 3010B (2-wire) 
                     128kbps to 11.392Mbps (N x 64K, N=2 ~ 178) for 3011B (4-wire) 
  • Connector: D25F
  • LEDs Indicator: PWR, SHDSL, TD, RD, CTS, TEST, Error, ALARM, and FAR

Ethernet Interface Line Card, 3020B/3021B

  • Compliment: IEEE 802.3/IEEE 802.3u , Supports auto-negotiation on 10/100Base-T and half/full duplex
  • Connector: RJ-45
  • Bridge: Auto-Filtering in transparent mode, and IEEE 802.1D transport, up to 2K MAC addresses self-learning
  • LEDs: PWR, SHDSL, LINK/ACT, 10/100M, DUPX, TEST, Error, ALARM, and FAR

T1 Interface Line Card, 3030B/3031B

  • Line card : AMI/B8ZS
  • Interface Connector: RJ45
  • Framing : SF/ESF/Unframed
  • Data Rate : 64kbps to 1.536Mbps ( N=1 to 24)
  • Operation : Full and Factional
  • LEDs Indicator: PWR, Shdsl, LOS, LOF, AIS, TEST, Error, ALARM, and FAR
SNMP Management Module
  • Compliment: SNMP v1/v2/v3 (RFC1157)
                        Shdsl MIB(RFC 4319)
                        DS1/E1 MIB(RFC 2495)
                        Private MIB
  • Connector:
    • Craft Console Interface:RJ-45 for com port
    • LAN interfaces: AUTO MDI/MDI-X, Auto-Negotiation,
    • Front panel: RJ45 x 1, for PC direct connect,
    • Rear panel: RJ45 x 1 for Daisy Chain
  • LEDs: PWR, SYS, ALM, ACO, LINK/ACT
  • ACO Reset: Audio Alarm Cut Off (ACO) reset switch available
  • Http server embedded: support remote management via web browser
System Management
  • Diagnostic Loopback: support the following loopback for diagnostic
    • Digital Local Loopback
    • Local Loopback
    • Remote Local Loopback
    • Remote Payload Local Loopback
    • Far-end Line loopback
    • Far-end Payload loopback
    • V.54 Loopback (for V.35 Interface)
  • BERT: Built-in Bit Error Rate Test for E1 and V35 Interface
  • Audio and Visible Alarm: dry contact available
Performance Monitoring (PM)
  • Shdsl PM : ES-crc, SES-crc, UAS, LOSW seconds
  • E1 PM : ES, SES, UAS seconds
  • Provide Current 15-minute period and 96 previous 15-minute periods of SHDSL and E1 performance parameters
  • Current 24-hour period and 7 previous 24-hour periods of Shdsl and E1
Dimension
  • Chassis: 44 x 17.8 x 31.5 cm (WxHxD)
  • Interface Line Card: 25 x 15.7 x 2 cm (WxHxD)
  • Management Control Card: 25 x 15.7 x 2 cm (WxHxD)
System Timing
  • Internal / External (E1, T1, Serial)/ Loop Timing
Power Supply Module Requirement
  • DC input: -36V to -72V, 6A
  • AC input: 100V to 240V, 2A
Power Consumption
  • Total 200W Max
  • Interface Line Card: 12W maximum
  • Management Control Card: 5W maximum
Environmental Requirement
  • Temperature: 0°C to 60°C (operation) 
                      -40°C to 70°C (storage)
  • Relative Humidity: up to 95% (without condensation)
Regulatory
  • Safety: EN60950 Amendments 1 to 4
  • Emissions: EN55022 class A; EN55024; EN61000

NTU Specifications

Single interface series:

E1 Interface

  • RJ-45 for E1 balanced
  • BNC for E1 unbalanced

Serial Interface

  • DB-25F for V.35, X.21, RS-530 and V.36

Ethernet Interface

  • RJ-45 connector for Ethernet
Multi-interface series:

E1+T1 Interface

  • RJ-45 for E1/T1 balanced
  • BNC for E1 unbalanced

E1+Serial+Ethernet

  • RJ-45 for E1 balanced
  • BNC for E1 unbalanced
  • DB-25F for V.35, X.21, RS-530 and V.36
  • RJ-45 connector for Ethernet

E1/T1+Serial+Ethernet

  • RJ-48C for E1/T1 balanced
  • BNC for E1 unbalanced
  • DB-25F for V.35, X.21, RS-530 and V.36
  • RJ-45 connector for Ethernet
Management
  • Configuration with keypad and LCD display
  • Console port
  • Support firmware upgradeable
Physical/Electrical
  • Dimensions: 19.5 x 4.8 x 16.8 cm (WxHxD)
  • Power Input: 100~240V AC with 50~60Hz or -36V to -72V DC
  • Power Consumption: 10W Max
  • Operation: 0°C to 60°C
  • Humidity: Up to 95% (non-condensing)

Ordering Information

19" Chassis for G.Shdsl Rack Mount Solution - 3000 Series
3000-SH 19" 4U Rack mount Chassis with 
• 16 slot Chassis (15-slot for Line cards and 1-slot for SNMP card)
3000-PW AC/DC Power Supply Module support 
• 100V to 240V AC input,
• -36V to -72V DC input 
• Hot swappable and Auto-Load-Balance
3000-SNMP SNMP Management Module Card
3000-SH-PW 19" 4U Rack mount Chassis with 
• 16 slot Chassis (15-slot for Line cards and 1-slot for SNMP ca rd) 
G.Shdsl.bis TDM Line card 3000B Series
Interface type 2-wire (2 Channel/card) 4-wire (1 Channel/card)
E1 3000B 3001B
Serial 3010B 3011B
Ethernet 3020B 3021B
T1 3030B 3031B
Single Interface models
Interface2-wire4-wire
E1 5099B-AC/2W/E1 
5099B-DC/2W/E1 
5099B-DA/2W/E1
5099B-AC/4W/E1 
5099B-DC/4W/E1 
5099B-DA/4W/E1
Serial 5099B-AC/2W/SER 
5099B-DC/2W/SER 
5099B-DA/2W/SER
5099B-AC/4W/SER 
5099B-DC/4W/SER 
5099B-DA/4W/SER
Ethernet 5099B-AC/2W/ETH 
5099B-DC/2W/ETH 
5099B-DA/2W/ETH
5099B-AC/4W/ETH 
5099B-DC/4W/ETH 
5099B-DA/4W/ETH
Multi Interface models
Interface2-wire4-wire
E1+T1 5099B-AC/2W/E1T1 
5099B-DC/2W/E1T1 
5099B-DA/2W/E1T1
5099B-AC/4W/E1/T1 
5099B-DC/4W/E1/T1 
5099B-DA/4W/E1/T1
E1+Serial+Ethernet 5099B-AC/2W/E1/SER/ETH
5099B-DC/2W/E1/SER/ETH
5099B-DA/2W/E1/SER/ETH
5099B-AC/4W/E1/SER/ETH
5099B-DC/4W/E1/SER/ETH
5099B-DA/4W/E1/SER/ETH
E1+T1+Serial+Ethernet 5099B-AC/2W/E1/T1/SER/ETH 
5099B-DC/2W/E1/T1/SER/ETH
5099B-DA/2W/E1/T1/SER/ETH
5099B-AC/4W/E1/T1/SER/ETH 
5099B-DC/4W/E1/T1/SER/ETH
5099B-DA/4W/E1/T1/SER/ETH