101MI GPROSCEND 101MI-G is an Ultra-Speed Copper Ethernet Extender that supports an impressive aggregated bandwidth up to 300Mbps. (Downstream: 190 Mbps/Upstream: 110 Mbps) It delivers fiber-optic like speeds on existing copper infrastructure, enabling a good alternative in place where fiber is not economical to deploy. 101MI-G is equipped with 4 Gigabit Ethernet Ports (RJ-45 connector) and one VDSL2 port (RJ-45 connector) in metal enclosure. It is designed as an Industrial grade product for quick and robust installation in harden environment. 101MI-G supports transparent LAN bridging to extend Ethernet service over UTP, Cat 5+ or Coaxial cables. It is accompanied by a Windows-based software tool DSLmonitor that allows easy access for users to read, monitor and configure 101MI-G through its Ethernet ports. With 101MI-G’s superior performance in its category, it is the best high throughput Long Reach Ethernet Extenders for service providers to deploy their IP-based networking services to meet various application scenarios.


  • High speed Ethernet extension over UTP, CAT 5e/6/7 or Coaxial cables.
  • Cost effective bridge function to connect two Ethernet LAN
  • Support extended temperature range
  • IEEE 802.1Q VLAN tag transparent
  • Easy installation via simple plug-and-play
  • Accompanied by Windows-based “DSLmonitor” tool for easy management

101MI G 1


VDSL Interface
  • RJ-45 connector
  • DMT Encoding
  • Complying with ITU-T G993.1/993.2/G.997.1
  • On-board surge protection
LAN Interface
  • 4 x RJ-45 connectors
  • 10/100/1000 Base-T; Auto-Negotiation, Auto-MDI/MDI-X.
  • Complying with IEEE 802.3/802.3u/802.3z
4-position DIP Switch
  • Selectable CO or CPE mode
  • Selectable Fast or interleave mode
  • Selectable 30a or 17a (VDSL2 Profile)
    Profile 30a: High Throughput Mode
    Profile 17a: Long Reach Mode
  • Selectable target SNR margin (6dB or 9dB)
  • Power: On/Off
  • LAN: Fast Ethernet/Gigabit Ethernet
  • VDSL2: Mode - CO/CPE
    Sync - Idle/Trained/Link
Power supply
  • Option 1: 7 -21 Vdc over terminal block
    (External Power Adaptor is not included)
    Option 2: 12 Vdc over 2.1mm DC Jack
    (External Power Adaptor included)
  • Power Consumption: 4.5 Watts maximum
Dimension: 88 mm x 40 mm x 110.7mm
Operating Temperature: -40°C ~+75°C
Humidity: 0%~95%RH (non-condensing)
Installation: Wall Mounting or Magnet Kit(optional)
Regulatory Compliance
  • CE
  • FCC Part 15 Class A
  • EN60950

101MI G Front Panel

Front Panel

101MI G Rear Panel

Rear Panel

Profile 30a: High Throughput Mode


Upstream Line Rate
Downstream Line Rate
500 97 183
1,000 59 136
1,500 40 96
2,000 24 64
2,500 10 56
3,000 6 43


Profile 17a: Long Reach Mode


Upstream Line Rate
Downstream Line Rate
500 54 129
1,000 49 112
1,500 39 84
2,000 23 60
2,500 11 45
3,000 6 40
4,000 1 31
6,000 0.64 14
9,000 0.36 4



* Features and specifications are subject to change without prior notice