100MI

PROSCEND100MI VDSL2 Industrial Ethernet Extender is a high-speed Ethernet Extender designed for Utility applications. It is equipped with one Ethernet port (RJ-45 connector) and one VDSL port (RJ-45 connector) in metal enclosure for easy installation in harden environment . It is a bridge mode modem, well accommodating VDSL2 (Very-high-data- rate Digi tal Subscr ibe Loop) technology to extend Ethernet service over single-pair phone line. It is compliant to ITU-T G.993.2 standard and supports VDSL2 30a profile that features 100Mbps of symmetric data rate over the existing copper wires. Supporting both symmetric and asymmetric transmission, it can reach up to 100/100 Mbps bandwidth (line rate) within 300M or 10/10 Mbps (line rate) for 1 Km long range connections. By providing ultra-high speed, 100MI VDSL2 Ethernet Extender makes your telephone line achieve its best performance. I t has the advantage of minimum installation time (simply as plug-n-play) and minimum expense by allowing video streaming and data to share the same telephone pair without interference. 100MI VDSL2 Ethernet Extender delivers everything needed to quickly deploy a high-speed IP-based network for high-speed Internet access, video-on demand services and voice services. The resulting compact, cost-effective form factor offers System Integrators, small business owners an attractive Long Reach Ethernet solution.

Features

 
  •  Metal enclosure and Phoenix connectors for easy installation in Utility applications
  •  Cost effective bridge function to connect two Ethernet LAN
  •  Support flow control on Fast Ethernet port via PAUSE frame or Back Pressure
  •  IEEE 802.1Q VLAN tag transparent
  •  Easy installation via simple plug-and-play
  •  Selectable CPE and CO mode via DIP switch:
    • Two working modes are built in the same unit, which keep the flexibility of installation and easy provision of service but lower inventory of service provider
  •  Selectable VDSL2 profile mode (17a or 30a):
    •  Support up to VDSL2 30a profile to ensure high data rate.
  •  Selectable target band plan:
    •  Symmetric: Support the band plan G.997 and provide the symmetric transmission on both        downstream and upstream.
    •  Asymmetric: Provides highest line rate in short range in asymmetric mode.
  •  Selectable target SNR margin
  •  Compatible with Proscend 724M/708M DSLAM & third party DSLAM.
 
Specifications
 
  •  4-position DIP Switch
    •  Selectable CO or CPE mode
    •  Selectable 30a or 17a (VDSL2 Profile)
    •  Selectable Band plan (Symmetric or Asymmetric)
    •  Selectable target SNR margin (6dB or 9dB)
  •  LAN Interface:
    •  RJ-45 connector
    •  Complying with IEEE 802.3/802.3u/802.3x
    •  10/100 Base-T Auto-Negotiation, Auto-MDI/MDI-X.
  •  LED:
    •  LAN: ACT/LNK,10/100Mpbs, Half/Full Duplex
    •  VDSL: Power On/Off, CO/CPE, Idle/Trained/Link
  •  VDSL Interface:
    •  RJ-45 connector
    •  DMT Encoding
    •  Complying with ITU-T G993.1/993.2/G.997.1
    •  On-board surge protection
  •  Power supply:
    •  Option 1: 5 -20 Vdc over Phoenix connector (External Power Adaptor not included)
    •  Option 2: 12 Vdc over 3.5mm DC Jack (External Power Adaptor included)
  •  Power Consumption: 4.2 Watts maximum
  •  Dimension: 73.4mm x 96.2mm x 22.8mm
  •  Operating Temperature: -20°C ~65°C
  •  Humidity: 0%~95%RH (non-condensing)
  •  Regulatory Compliance
    •  CE
    •  FCC Part 15 Class A
    •  EN60950